Iron Flap Hydraulic Unloading Platform-Angus Door Controls Ltd.

Iron flap hydraulic unloading platform

The hydraulic unloading platform serves as a transition device between the platform loading area and the truck during loading and unloading, enabling forklift equipment to enter and exit the truck on a flat plane, loading and unloading goods in a convenient and efficient manner.

The complete electro-hydraulic unloading platform consists of an integrated hydraulic system, an integral table top structure, a loose-leaf hitch plate structure, an open base, safety foot side guards, and two standard impact protection rubbers, all manufactured in accordance with EN1398 standards, featuring stable performance, easy operation, smooth running, low maintenance and simple repair.

mail Message

Product Features

Under the working condition, the hitching plate of the overturning plate unloading platform turns over 90 degrees parallel to the platform plate under the drive of the hydraulic system, and naturally descends with the unloading platform to hitch to the end of the lorry (container), at this time, the forklift equipment can be used to enter and exit the lorry and load and unload the goods on a flat plane.

Technical parameters

labial plate The lip plate is made of 16mm patterned board processing, the whole board without splicing, long-term use without cracking and deformation. This programme is an optional configuration.
countertop The table top is a full sheet of patterned board with a thickness of 8mm. The whole board has no splicing, no cracking or deformation for long-term use. This programme is an optional configuration.
Platform structure Adopting the overall platform surface structure design, the surface of the high-strength tensile pattern board countertop. The bottom skeleton of the panel adopts steel profile or 14# I-beam support structure according to customer's requirements, which effectively decomposes the distribution of force and reduces the torsion of the skeleton. The static load capacity of the table top ranges from 8 tonnes to a maximum of 15 tonnes, and the dynamic load ranges from 5 tonnes to a maximum of 10 tonnes.
surface treatment The steel structural parts are subjected to strict surface treatment of shot blasting and rust removal, without any welding spatter and slag. All steel structure components have been through two primers, two topcoats, and the choice of high-quality polyurethane topcoat and varnish, film thickness of not less than 0.08mm, drying treatment; standard topcoat selection of blue RAL5010.
The smooth transition of the tail section effectively reduces the impact of bumps generated during loading on the cargo, forklift and driver's neck.
Assembling and repairing support rods The unloading platform is equipped with an assembly and maintenance support bar to support the unloading platform and ensure the safety of the operator under the platform during equipment maintenance and overhaul or pit cleaning.
Open Loose-leaf Joint Construction Made of high-strength tensile patterned steel plate, connected by a high-strength galvanised shaft steel with a diameter of 25-30mm (1"-1.2"). Open type loose-leaf joints increase the weld area up to 300% compared to traditional tube type welded joints, increasing the force area by more than 2.5 times, so that the loose-leaf small spanner increases up to 4 times the load-bearing capacity; and it is easier to maintain.
power unit Consists of an integrated hydraulic system and hydraulic pump station. The power unit is mounted on the base of the unloading platform, installed above the pit level and away from rubbish and debris. One-piece hydraulic system. Suitable for ambient temperatures up to 40°C (100°F). Single pipe connection extends the life of the fully sealed hydraulic system and hydraulic pump station, reducing maintenance costs.
Solenoid and explosion-proof valves Can be in the process of unloading, when the truck suddenly left the platform unloading area, the solenoid valve quickly act to prevent the rapid decline of the platform, can make the goods and forklift trucks to keep in the horizontal plane, minimise the occurrence of accidents, to ensure the safety of the operator.

Technical parameters

Length, mm		2000	2500	3000	3500	4000
Width, mm		1800	2000	2000	2000	2000
Scope of work	try to improve oneself	240	304	365	425	485
Scope of work	downwards	300	300	300	300	350
Thickness of table plate		6/(0.6-1.8)mm or 8/(0.6-1.8)mm
Lip thickness		12 or 16mm

performances

Maximum load capacity	6000kg(60KN)/10000kg(10KN)
Maximum load per unit area (8mm thick table plate)	6.5N/mm²
Hydraulic cylinder power	1.1KW
power supply	380V, three-phase
Control Voltage	24V
Protection class of the control unit	IP54
hydraulic oil	Mobile VG46
Surface finish before spraying	Sa 2
Coating thickness	60-90μm
Operating Temperature Range	-30 to +50°C, low-temperature hydraulic fluid (below -20°C) can be changed for extreme weather conditions.

Matching/Accessories

	norm	Optional*
Installation	Pre-embedded/Suspended	Installation method according to actual requirements
colour	Blue (RAL 5005)	take whichever one fancies
labial plate	400mm, Bevelled 35mm	Lip 500mm / Segmented Lip / Wedge Lip
hydraulic unit	One lifting cylinder/one lip control cylinder	Two lifting cylinders, -50°C low temperature hydraulic fluid
seal up	PVC strip sealing on all sides	Please enquire separately for loading platforms larger than 3000mm.
Maximum load	6000/10000KG	Please enquire
Scope of work	From -350 to 550 mm	Please enquire