Iron Flap Hydraulic Unloading Platform-Angus Door Controls Ltd.

Iron flap hydraulic unloading platform

The hydraulic unloading platform serves as a transition device between the platform loading area and the truck during loading and unloading, enabling forklift equipment to enter and exit the truck on a flat plane, loading and unloading goods in a convenient and efficient manner.

The complete electro-hydraulic unloading platform includes an integrated hydraulic system, an integral table structure, a loose-leaf small hitch plate structure, an open base, safety foot side guards, and two standard collision avoidance rubbers, all of which are manufactured in accordance with the EN1398 standard, and are characterized by stable performance, simple operation, smooth running, low maintenance, and simple repairs.

mail Message

Product Features

Under the working condition, the hitch plate of the overturning plate unloading platform is turned over 90 degrees parallel to the platform plate under the drive of the hydraulic system, and naturally descends with the unloading platform to hitch to the tail of the truck (container), and at this time, the forklift equipment can enter and exit the truck and load and unload the goods on a flat plane.

Technical Parameters

labrum The lip plate is made of 16mm patterned board processing, the whole board without splicing, long-term use without cracking and deformation. This program is an optional configuration.
countertop The countertop is a full sheet of patterned board with a thickness of 8mm. The whole board has no splicing, no cracking or deformation for long-term use. This program is an optional configuration.
Platform structure Adopting the overall platform surface structure design, the surface of the high-strength tensile pattern board countertop. The bottom skeleton of the panel adopts steel profile or 14# I-beam support structure according to customer's requirement, which can effectively decompose the distribution of force and reduce the torsion of the skeleton. The static load capacity of the table top ranges from 8 tons to maximum 15 tons, and the dynamic load ranges from 5 tons to maximum 10 tons.
surface treatment The steel structural parts are subjected to strict surface treatment of shot blasting and rust removal, without any welding spatter and slag. All the steel structure components have gone through two primers, two topcoats, and the choice of high-quality polyurethane topcoats and varnishes, paint film thickness of not less than 0.08mm, drying treatment; the standard topcoat selection of blue RAL5010.
The smooth transition of the tail section effectively reduces the impact of the bumps generated during loading on the cargo, forklift and driver's neck.
Assembling and repairing support rods The unloading platform is equipped with an assembly and maintenance support bar to support the unloading platform and ensure the safety of the operator under the platform during equipment maintenance and overhaul or pit cleaning.
Open Loose-leaf Joint Construction Made of high-strength tensile patterned steel plate, connected by a high-strength galvanized shaft steel with a diameter of 25-30mm (1"-1.2"). Open type loose-leaf joints increase the weld area up to 300% compared to traditional tube type welded joints, increasing the force area by more than 2.5 times, so that the loose-leaf small wrench increases up to 4 times the bearing force; and it is easier to maintain.
power unit It consists of an integrated hydraulic system and a hydraulic pump station. The power unit is mounted on the base of the unloading platform, installed above the pit level and away from trash and debris. One-piece hydraulic system. Suitable for ambient temperatures up to 40°C (100°F). Single pipe connection extends the life of the fully sealed hydraulic system and hydraulic pump station, reducing maintenance costs.
Solenoid and explosion-proof valves Can be in the process of unloading, when the truck suddenly left the platform unloading area, the solenoid valve quickly act to prevent the rapid decline of the platform, can make the goods and forklift trucks to keep in the level, minimize the occurrence of accidents, to ensure the safety of the operator.

Technical Parameters

Length, mm		2000	2500	3000	3500	4000
Width, mm		1800	2000	2000	2000	2000
Scope of work	try to improve oneself	240	304	365	425	485
Scope of work	downward	300	300	300	300	350
Thickness of table plate		6/(0.6-1.8)mm or 8/(0.6-1.8)mm
Lip thickness		12 or 16mm

performances

Maximum load weight	6000kg(60KN)/10000kg(10KN)
Maximum load per unit area (8mm thick table plate)	6.5N/mm²
Hydraulic cylinder power	1.1KW
power supply	380V, three-phase
Control Voltage	24V
Protection class of the control unit	IP54
hydraulic oil	Mobile VG46
Surface finish before spraying	Sa 2
Coating thickness	60-90μm
Operating Temperature Range	-30 to +50°C, low-temperature hydraulic fluid (below -20°C) can be changed for extreme weather conditions.

Matching/Accessories

	(an official) standard	Optional*
Installation	Pre-embedded/Suspended	Installation method according to actual requirements
color	Blue (RAL 5005)	take whichever one fancies
labrum	400mm, beveled 35mm	Lip 500mm / Segmented Lip / Wedge Lip
hydraulic unit	One lift cylinder/one lip control cylinder	Two lifting cylinders, -50°C low-temperature hydraulic fluid
seal up	PVC strip sealing on all sides	Please inquire separately for loading and unloading platforms larger than 3000mm.
Maximum load	6000/10000KG	Please consult
Scope of work	From -350 to 550mm	Please consult